铝用预焙阳极,Pre-baked Anode Used in the Aluminum Production
1)Pre-baked Anode Used in the Aluminum Production铝用预焙阳极
1.Discussion on New Mixing and Compacting Technology with High Temperature forPre-baked Anode Used in the Aluminum Production浅论铝用预焙阳极高温混捏成型新技术
英文短句/例句
1.Application of coke-oven gas in pre-baked anode system焦炉煤气在铝用预焙阳极生产中的应用
2.Discussion on New Mixing and Compacting Technology with High Temperature for Pre-baked Anode Used in the Aluminum Production浅论铝用预焙阳极高温混捏成型新技术
3.Experimental Application of Pre-baked Slot Anode in 300 kA Aluminum Smelting Pot预焙沟槽阳极在300kA铝电解槽上的试验与应用
4.Technique code for retrofitting soderberg cell into prebaked anode cell in aluminium smelters自焙阳极铝电解槽预焙化改造技术规范
5.The Simulation of the Flow Field of 300kA Large Scale Prebaked Aluminum Electrolysis Cell300kA预焙阳极铝电解槽流场的仿真
6.THE DISCUSSION OF THE ELECTROLGSIS ALUMINUM SMELTER GREEN ANODE CRACKS铝电解预焙阳极生块裂纹问题的探讨
7.Research and Application on the Coupled Simulation Method of Electric Field、Magnetic Field、Flow Field in Prebaked Anode Aluminum Reduction Cells预焙阳极铝电解槽电场、磁场、流场的耦合方法及应用研究
8.Application and Practice of the Large-scale 306KA Prebaked Aluminum Reduction Cell with Integrated of Energy-saving Measures306KA大型预焙阳极铝电解槽综合节能措施的应用实践
9.Optimized baking process of anode baking furnace in Huasheng Al. Smelter华圣铝业阳极焙烧炉的焙烧工艺优化
10.Structural-Thermo-Electric Coupled Simulation of the Cathode Lining in the 160kA Prebaked Aluminum Reduction Cells;160kA预焙阳极铝电解槽阴极内衬电—热—应力计算机仿真研究
11.open prebaked anode type cell敞开式预焙阳极电解槽
12.Analysis on gas flue treatment of open type baking furnace of prebaked Anode预焙阳极敞开式焙烧炉烟气治理方法探讨
13.Study on Oxidizing Characteristics of the Electrode in Thermal Bake-out for Aluminum Reduction Cells;铝电解槽烟气焙烧中阴阳极的氧化特性研究
14.The Prediction of Carbon Anode and Cathode in Chinese Electrolytic Aluminum Industry;我国电解铝用阳极与阴极炭块市场需求预测
15.JAW HOLE DENSIFICATION FOR IMPROVING QUALITY OF PREBAKED CARBON ANODE VERTICALLY CHARGED IN BAKER应用爪孔密实技术提高竖装预焙阳极质量的研究
16.ANALYSIS ON PRACTICABILITY APPLICATION OF SUBSTITUTING BOSHI PERMOMETER FOR BLAINE DETERMINATOR IN PRODUCTION OF PRE-BAKED ANODE勃氏透气仪替代Blaine值测定仪在预焙阳极生产中应用可行性分析
17.Application and study of energy saving fixture in anode baking furnace阳极焙烧炉节能型炉具的应用与研究
18.Causes of green anode block cracking and its troubleshooting预焙阳极生块产生裂纹的原因分析及对策
相关短句/例句
pre-baked anode carbon block for aluminium铝用预焙阳极炭块
3)pre-baked anode预焙阳极
1.Application of coke-oven gas inpre-baked anode system焦炉煤气在铝用预焙阳极生产中的应用
2.Concerning the common fuels,that is man-made coal gas,heavy oil and natural gas,normally used for anode pre-baking at aluminum smelter,comparable analyses are conducted on the respects of direct economic benefit,indirect benefit and social environmental benefit,it is concluded that natural gas is the best to be used as fuel forpre-baked anode in aluminum smelter.针对目前国内铝用预焙阳极焙烧炉常用燃料(人工煤气、重油和天然气),从直接经济效益、间接效益和社会环保效益方面进行了对比分析,得出了"铝用预焙阳极焙烧采用天然气做为燃料是最为理想"的结论。
3.The paper makes a systematic discussion on the influence that the ash content ofpre-baked anode makes during the aluminium production.本文系统探讨了预焙阳极灰分对电解铝生产的影响,并针对预焙阳极生产中灰分的来源及构成进行了较全面的量化分析,结合生产实际,提出了有效的控制措施。
4)prebaked anode预焙阳极
1.Numerical simulation ofprebaked anode current and temperature fields of aluminum reduction cell;预焙阳极铝电解槽阳极电、热场的数值仿真与优化
2.Influences ofprebaked anode on electrolytic aluminun production;预焙阳极对于铝电解生产的影响
3.In this paper, the effects of the materials used forprebaked anode such as petroleum coke, coal tar pitch, stub and impurity elements, and all sorts of productio.针对此问题,本文主要探讨铝用预焙阳极所用原料石油焦、煤沥青、残极以及杂质元素和各生产工艺对阳极质量的影响,旨在生产阳极的过程中要尽量克服杂质元素的带入,提高阳极质量,降低阳极消耗,延长阳极使用周期,以达到大型铝电解槽在强化电流后提产、降本、增效之目的。
5)85kA prebake anode aluminum electrolysis cell85kA预焙阳极铝电解槽
6)aluminum cell with pre-baked anode预焙阳极铝电解槽
延伸阅读
焙焙 焙 同烘。详该条。
