高压阳极铝箔,high voltage anode aluminum foil
1)high voltage anode aluminum foil高压阳极铝箔
1.Evolvement of microstructures and textures in the preparation ofhigh voltage anode aluminum foil;高压阳极铝箔制备过程中组织与织构的演变
2.The conventional production technology for aluminum foil was modified by means of increasing cold rolling passes and rising intermediate annealing temperature to prepare ultra-thinhigh voltage anode aluminum foil.采用增加冷轧道次、提高中间退火温度等手段改进了传统高压阳极铝箔的生产工艺,以制备超薄型高压阳极铝箔。
英文短句/例句
1.Effects on texture of high-voltage anode aluminum foils by symmetric rolling and cross shear rolling同步异步轧制对高压阳极铝箔织构的影响
2.Study on the texture of high purity aluminum foil for electrolytic capacitor电解电容器高压阳极用高纯铝箔织构研究
3.High-voltage Anode Electrolytic Capacitor With Development of High-purity Aluminum Foil高压阳极电解电容器用高纯铝箔的发展
4.Study of the Electrolytic Etching of Ce Aluminum Foil for High Voltage Anode of Electrolytic Capacitor;稀土电解电容器高压阳极用铝箔电解腐蚀研究
5.Study on recrystallization texture of high purity aluminum foil for electrolytic capacitor电解电容器高压阳极用高纯铝箔再结晶组织研究
6.Study of the Microstructures and Textures in Re Aluminum Foil for High Voltage Anode of Electrolytic Capacitor;稀土电解电容器高压阳极用铝箔组织和织构研究
7.Etching technology of anode foil for medium/high voltage aluminum electrolytic capacitor;中高压铝电解电容器用阳极箔腐蚀扩面技术研究
8.Effect of Hot-rolling Process on Corrosion Resistance of Low Voltage Anodic Foil for Aluminum Electrolytic Capacitor热轧工艺对铝电解电容器用低压阳极箔的影响
9.Progress in preparing anode aluminum foils of high specific capacitance for electrolytic capacitors铝电解电容器用高比容阳极箔制备技术进展
10.Investigations on the Technical Processes and Cube Texture in Anode Aluminum Foil;阳极铝箔工艺过程和立方织构的研究
11.Formation of Al_2O_3-ZaO_2 composite anodic oxide film on aluminum foil铝箔表面Al_2O_3-ZaO_2复合阳极氧化膜的制备
12.Mechanisms of Formation of Cerium Conversion Films on Anodized Aluminum铝箔阳极氧化后2种铈转化膜的沉积机理
parison of measure methods of high pure anode foil cube texture高纯阳极箔立方织构测定方法的比较
14.Study on the Manufacture of High-performance Anodic Oxide Film Used for Low-voltage Aluminum Electrolytic Capacitor;低压铝电解电容器用高性能阳极氧化膜研究
15.Study on Preparation, Characterization and Application of Aluminum High Voltage Anodization Porous Film;铝高压阳极氧化多孔膜的制备、表征与应用研究
16.Study on the Technology and Mechanism of Manufacturing Aluminum Electrolytic Capacitor Foils with High Capacitance;高比容铝电极箔制造技术及其机理研究
17.Study on etching process of special high voltage anodic foil for aluminum capacitor特高压电容器用电极箔腐蚀工艺的研究
18.Design Optimization of Aluminium Foil High Speed Press Polish Roller Which Based on MATLAB of Fuzzy Theory基于模糊理论的MATLAB蒙特卡罗法铝箔高速压光辊优化设计
相关短句/例句
anodic foil of middle-high voltage for capacitor中高压阳极铝箔
1.In order to improve the precision of parameters measurement on the micro-morphology ofanodic foil of middle-high voltage for capacitor,a comprehensive analytical method was designed by computer image analytical technology,and actual surface micro-morphology was observed directly by SEM after electrolytic polishing treatment.为提高中高压阳极铝箔微观形貌参数测量分析的准确性,减少误差,提出一种结合计算机图像分析技术对中高压阳极铝箔微观形貌的分析方法。
3)high voltage anode foil高压阳极箔
1.To increase the forming velocity and special capacitance ofhigh voltage anode foil for aluminum electrolytic capacitor was researched.为了提高铝电解电容器用高压阳极箔形成速度与比电容,将水合处理后的腐蚀箔在95℃、2 g/L柠檬酸钠去离子水溶液中浸泡5 min,在530 V电压化成时,形成时间缩短约2 min,化成箔比电容由0。
4)anode aluminum foil阳极铝箔
1.Electrolytic capacitor is one of the three basic electronic components, capacitoranode aluminum foil is the key material for high quality electrolytic capacitors.电解电容器是电子工业的三大基础元件之一，电容器用阳极铝箔是制造优质铝电解电容器的关键材料。
5)aluminum anode foil铝阳极箔
6)aluminium foil for anode阳极用铝箔
延伸阅读
渤海铝业有限公司铝箔分卷机分卷铝箔渤海铝业有限公司铝箔分卷机分卷铝箔渤海铝业有限公司铝箔分卷机分卷铝箔
