键合图,bond graph
1)bond graph键合图
1.The development and present status about dynamic theory and analysis software of systems based onbond graphs;基于键合图的系统动力学理论及分析软件的发展及现状
2.Dynamic studying on planetary gear transmission system based onbond graph;基于键合图的行星变速器动力学研究
3.Application of powerbond graph on dynamic characteristics of a new counter balance valve;功率键合图在新型组合式平衡阀动态特性中的应用
英文短句/例句
1.Modeling of the hybrid system with the HBG in MBD;MBD中通过混合键合图对混合系统建模
2.Simulation of drum mixer system vibration based on power bond graph基于键合图的圆筒混合机系统的振动仿真
3.A BOND GRAPH METHOD FOR THE COUPLING DYNAMICS OF SPATIAL MULTIBODY MECHANICAL SYSTEMS空间多体机械系统耦合动力学的键合图法
4.Failure Diagnosis Method of Hybrid Dynamic System Based on Bond Graph基于键合图的混合动态系统故障诊断的方法
5.A Research on [Bond Graph-Modal Analysis] Method for Complex Elcetro-Mechanical System;复杂机电系统（键合图—模态分析）方法研究
6.Simulation and Test Research on Metal Belt CVT Based on Bond Graph Theory;基于键合图理论的金属带式CVT仿真与试验研究
7.Power Bond Graph Theory Study and Its Application in Thermal System;功率键合图理论及其在热工对象上的应用研究
8.Developing of All-purpose Simulation Software for Power Bond Graph Oriented;面向功率键合图的通用仿真软件的开发
9.Application of the Power Bond Graphs in Electrohydraulic Proportional System;功率键合图在电液比例同步系统中的应用
10.Study on Bond Graph-Based Modeling and Simulation of a Certain Type Marine Condenser某型船用冷凝器键合图建模与仿真研究
11.Robust Optimization Design of the Gear Transmission of Wind Turbine Based on Bond Graph基于键合图的风电齿轮传动系统稳健优化设计
12.Dynamic Similarity Analysis of Complex Electromechanical System Based on Bond Graph基于键合图的复杂机电系统动力学相似分析
13.Modeling and Simulation of Proportional Relief Vavle Based on Bondgraph and SIMULINK基于键合图和SIMULINK的比例溢流阀建模与仿真
14.Geometry Based Parametric Bond Graph Model of Diesel Cooling Fan-channel Analysis几何参数化计算的柴油机冷却风道键合图模型
15.Dynamic Simulation for Relief Valve Based on Power Bonding Diagram and SIMULINK利用功率键合图和SIMULINK实现溢流阀的动态仿真
16.A gyrobondgraph method for the modelling and simulation of planar multi-body dynamic systems平面连杆机构动态静力分析回转键合图法
17.Analysis on Auto Shock Absorber Malfunction Based on Bond Graph Model基于键合图模型的汽车悬架减振器失效分析
18.glucosidic linkage糖苷键[合],苷键[合]
相关短句/例句
Bond graphs键合图
1.Bond graphs was used to model the high speed on/off value,and a handy method for rebuilding the system modeling was put forward through combining the advantages of both bond graphs and high speed on/off value.运用键合图对高速开关阀进行建模。
2.Bond graphs and SIMULINK were used to modal and simulate the constant pressure valve,and a new method for dynamic design and analysis of constant pressure valve was put forward through analysis the dynamical characteristic of the valve core.运用键合图和SIMULINK对定压阀进行建模仿真,通过分析定压阀阀芯的运动特性,提出了一种用于定压阀动态设计和动态分析的方法。
3.The basic components for design synthesis are defined with their input/output characteristics and energy functions by the bond graphs.运用键合图方法定义了基本元件,并提取其输入输出特征与能量传递和转换函数。
3)power bond graph键合图
1.The transverse vibration model based on thepower bond graph is established in margin-single-gear transmission ball mill system,the equation is set up.应用键合图理论建立了边缘单齿轮传动式球磨机系统的横向振动模型,推导出状态方程,利用Matlab/Simulink对规格为2。
2.Taking YFD hydraulic profiling tool carrier for example,computer dynamics simulation on transition process of hydraulic servo system has been completed withpower bond graph and space-state method in this paper.以YFD型液压仿形刀架为例 ,利用键合图和状态空间法对液压伺服系统的过渡过程进行了计算机数字仿真 ,为伺服系统动态过程的理论分析研究及系统设计阶段的动态预测提供了依据。
3.In this paper,the dynamical model of the reciprocating pulsating-flow hydraulic system is developed by means ofpower bond graph.利用功率键合图建立了往复式交流液压系统的动态模型,给出了该系统的仿真模型,在SIMULINK环境下直接利用状态方程对系统的动态特性进行了仿真。
4)bond-graph键合图
1.From object-oriented view, this paper analyzed the character ofbond-graph model method, and pointed thatbond-graph model can be viewed as a kind of special object-oriented method.从面向对象的角度出发,分析了键合图建模方法的特点,指出键合图建模可以看作一类特殊的面向对象的建模方法,最后通过液压系统实例给出了SIDOPS语言描述的键合图模型。
2.Depending on the software of 20-sim,the simulation and analysis about non-linear circuit is done in the form of equations,based on the theory ofbond-graph.利用20-sim软件的功能,可以对非线性电路进行直接面向方程的仿真分析,也可以在现有非线性电路的基础上,转换成相应的键合图模型,利用键合图理论进行仿真分析。
5)Bond graph键合图法
6)Pseudo-Bond Graph伪键合图
1.IC Engine Modeling and Simulation Based onPseudo-Bond Graph;基于伪键合图的内燃机建模与仿真
2.The theory and modeling method of power bond graphs and pseudo-bond graphs are discussed, on principle of which, a simulating model describing the whole working process of IC engine is set up.简述了功率键合图和伪键合图的理论和方法,建立了内燃机工作过程的键合图模型,导出了内燃机系统的状态方程;并进行了系统的动力学仿真,获得了系统内部各部分状态变量的变化规律及关系,较全面地揭示了系统的热力学性能和动态特性。
延伸阅读
UG自定义右键弹出菜单和快捷键UG的右键弹出菜单包含了一些我们常用的功能，比如Roate、Fit等，为了使用的更加方便，我们也可以自己打造！打开UG安装目录下的UGII下的menus文件夹，里面包含了一些*.men和*.tbr，我们以文本方式打开它，发现也不难理解。例如，我们想在右键弹出菜单里面的roate和pan之间加入如图示的view下的orient功能，首先我们打开ug_main.men,查找orient，会看到下面的 BUTTON UG_VIEW_REFRESHLABEL &RefreshBITMAP refresh_window.bmpACCELERATOR F5ACTIONS STANDARDCASCADE_BUTTON UG_VIEW_EDITLABEL O&perationBUTTON UG_VIEW_ORIENTLABEL Ori&ent...ACTIONS STANDARD参考上面部分我们会看出快捷键的定义是*ACCELERATOR来指定的，我们把红色部分即BUTTON UG_VIEW_ORIENT的LABEL下面加入一行ACCELERATOR Ctrl+Alt+O(这里可以自行定义，但不要和别的重复)，保存，这样我们就把快捷键定义好了，然后我们选中红色部分复制。接着打开ug_view_popup.men，它就是右键弹出菜单的定义文件。为了把它放在roate和pan之间，我们把刚才复制的部分粘贴在下面图示的位置：TOGGLE_BUTTON UG_VIEW_POPUP_ROTATELABEL R&otateBITMAP rotate.bmpACCELERATOR F7ACTIONS STANDARDBUTTON UG_VIEW_ORIENTLABEL Ori&ent...ACCELERATOR Ctrl+Alt+OACTIONS STANDARDTOGGLE_BUTTON UG_VIEW_POPUP_PANLABEL &Pan BITMAP pan.bmpACCELERATOR F9ACTIONS STANDARD
