结晶形态,Crystal morphology
1)Crystal morphology结晶形态
1.SEM observation revealed that three kinds of crystal morphology formed orderly with the increase of PC ratio,i.SEM观察表明,随PC比例的增加,共混物高压下主要结晶形态以伸直链晶体,生长成熟的立体开放球晶,大尺寸球晶的方式变化。
2.The crystal morphology of hydroxyapatite synthesized in the mineralizing surroundings was affected by hydrogen bond between hydroxyapatite and mineralizer.本文着重研究了氢键对羟基磷灰石结晶形态的影响,建立了矿化剂OH—晶面OH动态平衡吸附模型,引入动态平衡吸附参数k,用来描述这种影响的程度。
3.Results showed the crystal morphology of HAp has a great impact on absorption.结果表明,HAp晶体的结晶形态对吸附效果有很大影响。
英文短句/例句
1.The "Reversal" Phenomenon of Crystalline Pattern on AlOOH Nano-whiskers Growth纳米AlOOH晶须生长结晶形态的“逆转”现象
2.CRYSTALLIZATION AND MORPHOLOGY OF HIGH CIS 1,4-POLYBUTADIENE高顺式-1,4-聚丁二烯的结晶形态研究
3.Micro/Nanoscale Research on Crystallization Behaviors of Copper Compounds微纳尺度下铜化合物的结晶形态研究
4.Crystalline Morphology of PLLA-PDLA Copolymer FilmsPLLA-PDLA共聚物薄膜的结晶形态
5.Study of Crystalline Morphologes and Kinetics in Miscible Crystalline/Crystalline Polymer Blends相容性结晶/结晶聚合物共混体系独特结晶形态及结晶动力学的研究
6.Influence of Si crystallization evolution on 1.54 μm luminescence in Er-doped Si/Al_2O_3 multilayer掺铒Si/Al_2O_3多层结构中结晶形态对1.54μm发光的影响
7.Influence of Organic Template on BaTiO_3 Crystallizing Habits in the Hydrothermal Method;水热反应中有机物模板对BaTiO_3结晶形态的影响
8.To assume a crystalline form.使结晶采取晶体的形态
9.Hot Deformation and Dynamic Recrystallization Behaviors of 316LN316LN热变形行为及动态再结晶晶粒的演变规律
10.The Spherulitic Morphology of Nylon 612 and Its Formation Conditions in Isothermal Crystallization尼龙612等温结晶的球晶形态与生成条件
11.Effect of Nucleating Agent on Crystal Morphology and Crystallization Behavior of LLDPE成核剂对LLDPE晶体形态及结晶行为的影响
12.Crystallization and Phase Morphology of iPP/EBR Binary BlendiPP/EBR合金的结晶和相形态
13.Static recrystallization of magnesium alloy AZ31 after severe deformation强变形AZ31镁合金的静态再结晶
14.Static recrystallization behaviors of deformed 42CrMo steel42CrMo钢形变奥氏体的静态再结晶
15.Nucleation of dynamic recrystallization of titanium alloy TA15 during hot deformation process in β fieldTA15钛合金β热变形中的动态再结晶形核
16.Effects of CTC-NO claw macromolecule on crystal structure and configuration of wax in diesel爪形大分子CTC-NO对柴油蜡晶结构和形态的影响
17.Effects of deformation temperatures on plastic formation and microstructure evolution of 42CrMo steel形变温度对42CrMo钢塑性成形与动态再结晶的影响
18.Crystallization of a compound in at least two distinct forms.多晶形一种化合物以至少两种不同的形态结晶的现象
相关短句/例句
crystalline morphology结晶形态
1.Effects of Nucleator on Crystalline Morphology and Mechanical Properties of Polypropylene;成核剂对聚丙烯结晶形态和力学性能的影响
2.Isothermalcrystalline morphology of isotactic polypropylene (iPP) with clarifying nucleator - TM-3 was observed by polarized light microscope.利用偏光显微镜观察了等规聚丙烯(iPP)在透明成核剂TM-3作用下的等温结晶形态,并与普通成核剂苯甲酸钠的影响作了对比。
3.Theircrystalline morphology was characterized by using polarizing light microscopy,which were contrast to HDPE/elastomer blends.通过DSC分析仪和偏光显微镜研究了共混物的熔融、结晶行为和结晶形态,并将其结晶形态与简单共混对照样加以对比研究。
3)Crystallization morphology结晶形态
1.The crystallization morphology of PCL in the blends can be changed with the crystallization temperature and the NC content obviously.聚己内酯结晶形态随结晶温度和共混物组成的变化表明 ,在共混体系中聚己内酯结晶速率与非晶第二组分的扩散速率存在一定的匹配关系 ,是影响环带球晶形成的重要因
2.The crystallization morphology and isothermal crystallization process were studied by means of polarized microscope and DLI(Depolarized Light Intensity) for poly(ether ester) block copolymers.采用偏光显微镜和光学解偏结晶速率仪研究了嵌段聚醚酯共聚物的结晶形态和等温结晶过程。
4)morphology[英][m?:"f?l?d?i][美][m?r"fɑl?d??]结晶形态
1.in order to understand the toughness mechanism of HDPE/HAP composite prepared by in situ biomineralization,the crystallization kinetics andmorphology of HDPE/HAP composite were investigated.研究了原位矿化复合方法对HDPE/HAP复合材料中HDPE的结晶形态及结晶动力学的影响,结果表明,原位矿化复合方法制备的复合材料中HDPE主要以放射状伸直晶形式存在,HDPE晶粒细小,结晶度高,且HAP与HDPE界面结合紧密。
2.Themorphology of the.用示差扫描量热法(DSC)研究了蒙脱土对聚丙烯及马来酸酐接枝聚丙烯的非等温结晶行为的影响;用偏光显微镜(POM)观察了聚丙烯及共混体系的结晶形态,估算了径向生长速率。
3.Research on Self-nucleation of Copolymer Polypropylene and the Crystallization Kinetics and Morphology of High Impact Polypropylene Copolymer;高抗冲聚丙烯(HIPP)与等规聚丙烯(iPP)结晶动力学、结晶形态进行研究发现,HIPP的结晶温度和熔融温度均低于iPP,等温结晶动力学表明,HIPP与iPP相比较,半结晶时间要长,结晶活化能和端表面自由能也要高。
5)crystalline state结晶形态
1.Polypropylene with variouscrystalline states was synthesized by experiments and analyzed by SEM.运用实验方法合成了不同结晶形态的聚丙烯 ,并通过扫描电镜及实验结果进行分析。
2.Theircrystalline state in benzene is examined by polarized microscope.以四庚基溴化铵为相转移试剂将该系列杂多化合物转移至有机溶剂苯中，通过偏光显微镜研究了其在苯溶液中的结晶形态。
3.Theircrystalline state in benzene are examined by various-temperature wide angle X-ray diffraction and polarized microscope.以四庚基溴化铵为相转移试剂将该系列杂多化合物转移至有机溶剂苯中，通过变温广角Ｘ－ｒａｙ衍射及偏光显微镜研究了其在苯溶液中的结晶形态。
6)Electrocrystal formation电结晶形态
延伸阅读
电结晶形态分子式：CAS号：性质：金属电沉积层外部形貌的几何特征。它受晶体内部结构的对称性、结构基元之间的成键作用力以及晶体缺陷等因素的制约，但在很大程度上受电沉积条件的影响。有时成分和结构相同的同一品种的电沉积层，其外部形貌的几何特性可能非常不同。常见的电结晶形态有层状、脊状、棱锥状和块状；较不常见的有螺旋状、枝晶和须晶。
