接触仿真分析,Contact simulation analysis
1)Contact simulation analysis接触仿真分析
1.Dynamic contact simulation analysis of the moving element in rotor lubricating pump转子式机油泵运动件动力学接触仿真分析
英文短句/例句
1.Gear Contact Simulation Based on Finite Element Method基于有限元方法的齿轮接触仿真分析
2.Dynamic Contact Simulation Analysis of Helical Gear with LS-DYNA基于LS-DYNA的斜齿轮动力学接触仿真分析
3.Dynamic contact simulation analysis of the moving element in rotor lubricating pump转子式机油泵运动件动力学接触仿真分析
4.Non-contact performance analysis and simulation for the non-contact backstop非接触式逆止器非接触性能分析及其仿真
5.Modeling and Simulation for Tooth Face Contact Analysis of Transmission Gears;变速器齿轮齿面接触分析建模与仿真
6.Simulation and Analyses of Contact Smoke Detection in Large Space Fire大空间火灾接触式感烟探测仿真分析
7.Contact Zone Simulation Analysis of Spiral Bevel Gear Teeth Faces in Heavy Load Transmission重载弧齿锥齿轮齿面接触区仿真分析
8.Analysis and Simulation of Static and Dynamic Characteristic for Electromagnetic Mechanism of AC Contactor;交流接触器电磁机构的动静态特性分析与仿真
9.Tooth Form Emulation and Tooth Contact Analyse of Klingelnberg Cyclo-Palloid Spiral Bevel Gear;克林贝格摆线齿锥齿轮的齿形仿真和接触分析
10.Finite Element Simulation of Hybrid Ceramic Angular Contact Ball Bearings;混合陶瓷角接触球轴承有限元仿真分析
11.Tooth Contact Analysis and Simulation Study of Mismatched Worm Gear Drive非对偶蜗轮蜗杆传动齿面接触分析与仿真研究
12.Pantograph and Overhead Contact Line Coupling Dynamic Model Simulation and Analysis of Imbalance of Overhead Contact Line弓网耦合动力学模型仿真及接触网不平顺分析
13.FE Analysis on Contact During the Meshing Process of Heavy-load Marine Helical Gears船用重载斜齿轮啮合过程接触有限元仿真分析
14.Numerical Simulation Analysis of Random Vibrations on Contact Nonlinear Structure接触非线性结构的随机振动数值仿真分析
15.Simulation Analysis of Operating Characteristics of Permanent Magnet Contactor under Different Temperature不同温度条件下永磁接触器动作特性仿真分析
16.FEA for Hybrid Ceramic Angle Contact Ball Bearings and Its Elementary Simulation Study;混合陶瓷角接触球轴承的有限元分析及其仿真初探
17.The Wire Race Ball Bearing Contact Stress Disquisition and Simulation;钢丝滚道球轴承点接触问题分析与运动过程有限元仿真
18.Contact Analysis and Simulation of the Fretting of Dimple and Tongue Interface for a Hard Disk Drive Suspension硬盘磁头悬架窝点与舌尖的微动接触力学分析及仿真研究
相关短句/例句
simulation analysis仿真分析
1.Simulation analysis of the high-temperature superconducting linear induction motor based on ANSYS;基于ANSYS的高温超导直线感应电机仿真分析
2.The modeling andsimulation analysis of the three-level STATCOM;三电平STATCOM的建模和仿真分析
3.Deformation numericalsimulation analysis of stiffened metal diaphragm for positive expulsion tank;锥柱形加筋金属膜片变形的数值仿真分析
3)Simulation[英][,s?mju"le??n][美]["s?mj?"le??n]仿真分析
1.Simulation Analysis of the Total Process for Clad Materials Connecting Rod Thermal Die Forging and Die Lifetime Pridiction;层状材料连杆热锻模锻压全过程仿真分析及模具寿命预测
2.The Application of MultilayerSimulation in the Improvement of Manufacturing Process;多层次仿真分析方法在制造流程改善中的应用研究
3.Finite element analysis and simulation on stress of cylindrical spur gear;基于ANSYS的直齿圆柱齿轮应力仿真分析
4)simulation and analysis仿真分析
1.Dynamicsimulation and analysis of pipes of air conditioners;空调配管动力学仿真分析
2.Kinematicsimulation and analysis of the double wishbone independent suspension by using the software ADAMS;基于ADAMS双横臂独立悬架的运动学仿真分析
3.Thesimulation and analysis of thermal effect in Xiaolangdi divertion tunnel during construction;小浪底工程泄洪洞衬砌施工期温变效应的仿真分析
5)simulating analysis仿真分析
1.The application in the Lianyuan Steel PL-TCM,composition, control, working principle andsimulating analysis of the CPC systems are presented in the paper.文章阐述了CPC系统的应用,装置组成、工作原理、控制原理及模拟仿真分析。
2.In accordance with the features of materials,construction and changes of temperature and stress of RCC,simulating analysis method as well as its present development and specific requirement are introduced.本文从碾压混凝土的材料特性、施工特点、温度场温度应力的变化特点入手,介绍了碾压混凝土仿真分析方法、目前进展、具体要求和应注意的问题,结合几个工程总结了碾压混凝土重力坝、拱坝的分缝方式,降低浇筑温度、水管冷却、表面保温、斜层碾压等温控措施,采用微膨胀混凝土、提高材料抗裂性能等碾压混凝土坝的温控防裂措施。
3.A mould standard parts library is constructed by integration of SolidWorks,VB and Access on the platform of SolidWorks software,which provides a convenient way ofsimulating analysis of mould structure.以SolidWorks软件为平台,将以SolidWorks、VB及Access结合建立的模具标准件库与可以方便地对所设计的模具结构进行仿真分析及有限元分析的Ansys相结合,形成一种进行模具的动态设计和优化的CAD/CAE模具设计集成环境。
6)emulation analysis仿真分析
1.Limit elementemulation analysis for the structure intensity of comprehensive mud logging units;综合录井仪器房结构强度有限元仿真分析
2.Theemulation analysis of high level buildings with bases of different properties and its working load;不同特性地基高层建筑施工荷载仿真分析
plicacy space steel structure construction whole processemulation analysis复杂空间钢结构施工全过程仿真分析
延伸阅读
国际仿真数学与仿真计算机学会各国仿真数学和仿真计算机方面的学者和团体联合组成的国际性学术组织,缩写IAMCS。1955年成立。原名国际模拟计算机学会（IAAC），1976年改用现名。中国自动化学会系统仿真专业委员会代表中国参加这个学会。学会总部设在比利时的布鲁塞尔。学会的宗旨是促进计算机仿真方面的专家、制造厂和用户之间交流科学信息。该会接受个人会员和团体会员（包括有关的工厂、机关和研究所），并设有荣誉会员。每三年举行一次国际性大会。它是5个国际学会协调委员会（FIACC）成员之一。其他 4个是国际自动控制联合会(IFAC)、国际信息处理联合会（IFIP）、国际运筹学会联合会(IFORS)和国际测量联合会（IMEKO）。学会出版物有：《IAMCS会议录》，《IAMCS会刊（仿真数学与仿真计算机）》和《IAMCS会刊（应用数值数学）》。
