F1型浮阀塔板,F 1 float valve tray
1)F 1 float valve trayF1型浮阀塔板
1.JF gird valve tray gains the advantage overF 1 float valve tray in total tray pressure difference, foam carrying, capacity, tray leaking.通过JF导向条阀塔板与F1型浮阀塔板的对比分析 ,表明JF导向条阀塔板在塔板漏液、雾沫夹带、处理能力等方面较F1型浮阀塔板有较大优势 ,是一种新型高效塔板。
英文短句/例句
1.Modeling F1 Valve Tray Hydraulics Using Computational Fluid Dynamics;F1型浮阀塔板两相流场的CFD模拟
2.spiral valve tray带螺旋叶片的浮阀塔板
3.Hydrodynamic Study of Two Types of Novel Valve Tray;两种新型浮阀塔板流体力学性能的研究
4.Application of Guiding Floating Tray in Combination in the 5th Carbon Removal Tower组合导向浮阀塔板在脱碳五塔的应用
5.Study on Hydrodynamic Performance and Mass Transfer Efficiency of Valve Trays;浮阀塔板流体力学和传质性能的研究
6.APPLICATION OF ADVANCED MICRO-DISPERSION VALVE TRAY IN LARGE-SCALE ATMOSPHERIC COLUMNADV微分浮阀塔盘在大型常压塔中的应用
7.This paper introduces a new T-arrangement rectangular float valve.本文介绍了一种新的T形排列条形浮阀塔板。
8.Chepos valve tray切普斯条形浮阀塔盘
9.Glitsch ballast valve tray格利奇重盘式浮阀塔盘
10.Experimental Study on the Hydrodynamic Performance and Mass Transfer Efficiency of Gradient Ringent Trapezoidal Valve Tray;斜孔梯形浮阀的塔板流体力学及传质性能实验研究
11.Application of Slant Hole- Float Valve Combination Tray in Capacity Expansion Revamping of Pangang"s Coal Tar Distillation System;斜孔—浮阀复合塔板在攀钢焦油蒸馏系统扩能改造中的应用
12.The Comparison of Downcomer Operating Capacities between CTST and Valve Plates and the Optimization of Downcomer Structure;CTST和浮阀塔板降液管操作能力比较及降液管结构优化
13.Experimental Study and CFD Simulation of Novel Fixed Valve Tray新型固阀塔板流体力学性能研究及流场模拟
14.Glitsch combined valve and sieve tray格利奇浮阀-筛孔混合塔盘
15.Experimental and Numerical Study of Flow Field on Folded-Downward Edge Fixed Valve Tray;折边固定阀塔板流场的实验研究和数值模拟
16.Three-Tower Rectifcation Technology by Using New Type Vertical Sieve Plate Tower for Methanol Production新型垂直筛板塔甲醇三塔精馏工艺技术
17.Available in Wafer (52 and 62) or Lug (54 and 64) style body.平板型(系列52和62)和吊耳型(系列54和64)阀体。
18.Research on RO/RO Operation of Heavy Lifts by Deck Barge in Free Floating Status甲板驳船自由浮态滚装大型货物研究
相关短句/例句
F1 valve trayF1型浮阀
1.But forF1 valve tray, which is used widely in practice, there isn’t any CFD simulation reported.目前CFD模拟主要集中在筛孔板塔上,而应用十分广泛的F1型浮阀塔板流场的CFD模拟研究却鲜有报道。
3)Super V4 valve traySuper V4型浮阀塔板
4)Novel floating valve tray新型浮阀塔板
5)valve tray浮阀塔板
1.Development and study of B-type directedvalve trays;B型导向浮阀塔板实验研究
2.In order to have reliable referenced data for selecting the height of floating valves when directed trapezoidalvalve trays were applied in industry,the experiment on the structure parameter of which was studied.采用空气-水系统,在500 mm×500 mm的方形塔内,对不同浮阀的升程对导向梯形浮阀塔板的流体力学进行了实验研究,测定了塔板压降、泄漏和雾沫夹带。
3.The hydrodynamics of the new employed gradient ringent trapezoidalvalve trays are experimentally studied with the air-water system in a 500 mm×500 mm quadrate column.采用空气-水系统,在500 mm×500 mm的方形塔内,对新开发的斜孔梯形浮阀塔板的流体力学性能进行了试验研究,测定了塔板压降、泄漏和雾沫夹带。
6)float valve tray浮阀塔板
1.In comparison with the traditionalfloat valve tray, the new tray had lower pressure drop (80-100Pa lower before valve fully opening and 300-400Pa lower after valve fully opening); weeping was about 10% less; the tray efficiency was about 10% higher; and flow guide function was obvious.介绍了洛阳石油化工工程公司设备研究所开发的导流浮阀塔板的结构特点、冷模试验结果及工业应用情况。
2.The FORGRAN Program, flow chats and illutration for calculation of technological design and hydraulics check of the HTV-typefloat valve tray were given.给出了一种新型浮阀塔板──HTV船型浮阀塔板的工艺及流体力学校核计算Fortan源程序、框图及计算示例。
延伸阅读
塔塔pagoda供奉或收藏佛舍利(佛骨)、佛像、佛经、僧人遗体等的高耸型点式建筑。又称佛塔、宝塔。起源于印度的窣堵波。汉代末年,丹阳人笮融造楼阁式塔,开中国造塔之先河。中国塔由地宫、塔基、塔身、塔顶和塔刹组成。地宫位于塔基正中地面以下,藏舍利。塔基包括基台和基座。塔刹位于塔顶之上,由须弥座、仰莲、覆钵、相轮和宝珠组成,有的在相轮上加宝盖、圆光、仰月和宝珠。中国塔按性质分有佛塔、高僧墓塔;按材料分有木塔、砖塔、石塔、金属塔、陶塔;按结构和造型分有楼阁式塔、密檐塔、单层塔、喇嘛塔。