抗剪切粘结强度,Shear bond strength
1)Shear bond strength抗剪切粘结强度
2)shear bond strength粘接抗剪切强度
1.In this study , we bonded resin orthodontic brackets to two kind of commonly - used prosthodontic materials: porcelain and light - cured composite resin with domestic adhesive, ordinary light - cured composite resin and BISCO ORTHO - ONE~? orthodontic Direct Bonding System respectively and then theshear bond strength of the re.本实验通过使用不同的粘接剂粘接树脂托槽与经过不同方式表面处理的瓷和光固化复合树脂修复材料,对其粘接抗剪切强度,影响树脂托槽与修复材料直接粘接的因素以及去粘接后原修复面的完整性进行实验研究。
2.In this study, we bonded metal orthodontic brackets to two kinds of commonly-used prosthodontic materials: porcelain and light-cured composite resin with domestic adhesive and ordinary light-cured composite resin respectively and then theshear bond strength of the metal brackets, the integrity of the prosthodontic surface after debonding and the microsco.本研究使用国产的粘合剂和普通光固化复合树脂粘接金属托槽与瓷、光固化复合树脂两种常用的修复材料，并对其粘接抗剪切强度，去粘接后原修复面的完整性，表面处理后修复面的显微形态结构进行了实验研究。
英文短句/例句
1.Shear Bond Strength of Orthodontic Brackets Bonded with a Self-etching Adhesive;自酸蚀粘接剂粘接抗剪切强度的实验研究
2.Shear Bond Strength of Resin Brackets Bonded to Porcelain and Light-cured Composite Resin;树脂托槽与瓷、光固化复合树脂粘接抗剪切强度的实验研究
3.Shear Bond Strength of Metal Brackets Bonded to Porcelain and Light-cured Composite Resin;金属托槽与瓷、光固化复合树脂粘接抗剪切强度的实验研究
4.Effect of Chlorhexidine Application on Shear Bond Strength of Brackets Bonded with Fuji Ortho LC氯己定对FujiOrtho LC粘接托槽抗剪切强度的影响初探
parison on Shear Bond Strength of Edgewise Brackets Bonding with Three Orthodontic Adhensives under Different Adhensive Conditions;三种正畸秞质粘接剂在不同粘接条件下的抗剪切强度比较
6.Effect of Self-etching Primer on Shear Bond Strength of Orthodontic Brackets within 1 Hour in Vitro自酸蚀粘接系统粘接托槽1小时内抗剪切强度的实验研究
7.Shear bond strength of three different orthodontic adhesives used in Fx glass ionomer cement filling materials三种正畸粘接剂粘接玻璃离子充填体的抗剪切强度
parison of Shear Bond Strength of Resin and Metal Brackets with Different Adhesives in Vitro;金属托槽与树脂托槽应用不同粘接剂抗剪切强度的体外研究
9.Effect of various surface treatmetns on the shear strength of orthodontic brackets不同方法处理瓷修复体后粘接托槽的抗剪切强度
10.Shear Bonding Strength of Orthodontic Resin Brackets with Different Orthodontic Adhensives in Vitro树脂托槽在不同粘接剂下抗剪切强度的体外研究
11.Effect of sandblasting on shear bond strength between rebonded metal brackets and enamel喷砂处理对脱落托槽与牙面粘结的抗剪切强度
12.Testing method for compressive shear strength of dowel joint by inorganic adhesivesGB/T11177-1989无机胶粘剂套接压缩剪切强度试验方法
13.Testing method for torsional shear strength of doedl joint by inorganic adhesivesGB/T14903-1994无机胶粘剂套接扭转剪切强度试验方法
14.The Influence of Dentin Desensitizers on the Shear Bond Strength of a Total-etch System;脱敏剂对全酸蚀粘接剂剪切强度的影响
15.A contrast of the shear strength between two enamel adhesion techniques:self-etching and all-etching自酸蚀与全酸蚀粘接系统对牙釉质剪切粘结强度的研究
16.Indirect methods to measure the interface bond strength include the interlaminar shear strength test.测量界面粘结强度的间接方法包括层间剪切强度试验。
17.Study of the Effect on the Shear Bond Strength of Orthodontic Brackets of Different Concentration Fluorided Etching Fluid;不同浓度氟化酸蚀液对托槽抗剪粘接强度影响的研究
18." Rubber, vulcanized--Method for determination of strength properties of adhesive to metal in shear by tension loading"GB/T13936-1992硫化橡胶与金属粘接拉伸剪切强度测定方法
相关短句/例句
shear bond strength粘接抗剪切强度
1.In this study , we bonded resin orthodontic brackets to two kind of commonly - used prosthodontic materials: porcelain and light - cured composite resin with domestic adhesive, ordinary light - cured composite resin and BISCO ORTHO - ONE~? orthodontic Direct Bonding System respectively and then theshear bond strength of the re.本实验通过使用不同的粘接剂粘接树脂托槽与经过不同方式表面处理的瓷和光固化复合树脂修复材料,对其粘接抗剪切强度,影响树脂托槽与修复材料直接粘接的因素以及去粘接后原修复面的完整性进行实验研究。
2.In this study, we bonded metal orthodontic brackets to two kinds of commonly-used prosthodontic materials: porcelain and light-cured composite resin with domestic adhesive and ordinary light-cured composite resin respectively and then theshear bond strength of the metal brackets, the integrity of the prosthodontic surface after debonding and the microsco.本研究使用国产的粘合剂和普通光固化复合树脂粘接金属托槽与瓷、光固化复合树脂两种常用的修复材料，并对其粘接抗剪切强度，去粘接后原修复面的完整性，表面处理后修复面的显微形态结构进行了实验研究。
3)shear bond strength剪切粘结强度
1.Theshear bond strength of three different commercial luting cements to the ceramic material was evaluated.置于37℃蒸馏水里保存24h后,进行剪切粘结强度测试。
2.Objective: this in vitro study was firstly to evaluate the effect of two different bleaching regimens and two weeks post-time bonding on theshear bond strength of dentin to composite resin, and observe the dentin/composite interface of each group under scanning electron microscope.目的:㈠通过用临床两种常用的漂白方法对离体牙进行漂白,采用即刻和延迟2周粘结树脂,分别测定牙本质和树脂剪切粘结强度,并用扫描电镜观察粘结界面超微形态,探讨漂白方法及漂白后粘结时间对牙本质粘结强度的影响,为临床上漂白后牙齿进行树脂粘结修复提供理论依据。
4)Shear bond strength抗剪粘结强度
5)adhesive shearing strength粘结抗剪强度
1.This paper studied the interfacialadhesive shearing strength between the cement-based mortar and the concrete substrate,and investigated the microstructures of the interfacial zones between the new mortars and the old concretes.研究了在采用不同的界面剂处理下,水泥基砂浆加固混凝土构件的界面粘结抗剪强度,并进行了加固砂浆和基层混凝土的界面处的微观结构观测分析。
6)bond shear strength between pavement layers层间剪切粘结强度
延伸阅读
剪切粘接强度分子式：CAS号：性质：在平行于胶层的载荷作用下，胶接试样破坏时，单位胶接面所承受的剪切力，用MPa表示。根据载荷的方向有拉伸剪切粘接强度和压缩剪切粘接强度。
